LifestyleStudy: 1960 ramjet design for interstellar travel—a sci-fi staple—is...

Study: 1960 ramjet design for interstellar travel—a sci-fi staple—is unfeasible


- Advertisment -

A hydrogen-collecting machine —

“It is very unlikely that even Kardashev civilizations of type II might build magnetic ramjets.”

Artist's impression of the Ramjet propulsion system proposed in 1960 by physicist Robert W. Bussard

Enlarge / Artist’s impression of the Ramjet propulsion system proposed in 1960 by physicist Robert W. Bussard


In Poul Anderson’s 1970 novel Tau Zero, a starship crew seeks to travel to the star Beta Virginis in hopes of colonizing a new planet. The ship’s mode of propulsion was a so-called “Bussard ramjet,” an actual (though hypothetical) means of propulsion which had been proposed by physicist Robert W. Bussard just a decade earlier. Now, physicists have revisited this unusual mechanism for interstellar travel in a new paper published in the journal Acta Astronautica, and alas, they have found the ramjet wanting. It’s feasible from a pure physics standpoint, but the associated engineering challenges are currently insurmountable, the authors concluded.

A ramjet is basically a jet engine that “breathes” air. The best analog for the fundamental mechanism is that it exploits the engine’s forward motion to compress incoming air without the need for compressors, making ramjet engines lighter and simpler than their turbojet counterparts. A French inventor named Rene Lorin received a patent in 1913 for his concept of ramjet (aka, a flying stovepipe), although he failed to build a viable prototype. Two years later, Albert Fonó proposed a ramjet propulsion unit to increase the range of gun-launched projectiles and eventually was granted a German patent in 1932.

- Advertisement -

A basic ramjet has three components: an air intake, a combustor, and a nozzle. Hot exhaust from fuel combustion flows through the nozzle. The pressure of the combustion must be higher than the pressure at the exit of the nozzle in order to maintain a steady flow, which a ramjet engine achieves by “ramming” external air into the combustor with the forward speed of whatever vehicle is being powered by the engine. There is no need to carry oxygen on board. The downside is that ramjets can only produce thrust if the vehicle is already moving, so they require an assisted takeoff using rockets. As such, ramjets are most useful as a means of acceleration, such as for ramjet-powered missiles or for increasing the range of artillery shells.

Simple ramjet operation, with Mach numbers of flow shown.

Enlarge / Simple ramjet operation, with Mach numbers of flow shown.

Robert Bussard thought the concept might be modified as a means for interstellar propulsion. The basic premise outlined in his 1960 paper is to scoop up interstellar protons (ionized hydrogen) using enormous magnetic fields as a “ram scoop.” The protons would be compressed until they produced thermonuclear fusion, and magnetic fields would then divert that energy into rocket exhaust to produce thrust. The faster the ship traveled, the higher the proton flow, and the greater the thrust.

But then scientists discovered that there was a much lower density of hydrogen in the regions of space outside our solar system. That’s why, in a 1969 paper, John F. Fishback proposed a possible functional magnetic scoop field, taking into account such factors as radiation losses and the thermal distribution of the interstellar gas.

In particular, Fishback calculated what the cut-off speed would be. “The faster the ship, the higher the magnetic field lines that focus them into the fusion reactor,” the authors of this latest paper explained. “Stronger field induce higher mechanical stresses.” Fishback concluded that an interstellar ramjet could only constantly accelerate up to a certain threshold speed, at which point it would have to throttle back, lest the magnetic source reach a breaking point.

- Advertisement -

It’s Fishback’s solution that has been examined in this latest paper. “The idea is definitely worth investigating,” said co-author Peter Schattschneider, a science fiction author and physicist at the Vienna University of Technology (TU Wien). “In interstellar space there is highly diluted gas, mainly hydrogen—about one atom per cubic centimeter. If you were to collect the hydrogen in front of the spacecraft, like in a magnetic funnel, with the help of huge magnetic fields, you could use it to run a fusion reactor and accelerate the spacecraft.”

He and his co-author, Albert Jackson of Triton Systems in the US, relied on software developed at TU Wien for calculating electromagnetic fields in electron microscopy. Their calculations showed that Fishback’s proposal of magnetic scooping (or particle trapping) for a Bussard ramjet is physically feasible. Particle can indeed be collected by a magnetic field and guided into a fusion reactor, achieving acceleration up to relativistic speeds.

However, the authors also found that absurdly long magnetic coils would be needed for the funnel in order to achieve a thrust of 10 million newtons (twice the propulsion of the space shuttle). And that funnel would have to have a diameter of 4,000 kilometers. Hence, visiting the galactic center in a spacecraft powered with Bussard ramjet within a lifetime is unrealizable. In fact, “It is very unlikely that even Kardashev civilizations of type II might build magnetic ramjets with axial solenoids,” the authors concluded. (For reference, humans on Earth have yet to attain a Type I civilization.)

DOI: Acta Astronautica, 2021. 10.1016/j.actaastro.2021.10.039  (About DOIs).

- Advertisement -

Join the pack! Join 8000+ others registered users, and get chat, make groups, post updates and make friends around the world!
Read More

- Advertisement -


  1. There’s an interesting theory that antimatter from the early universe is effectively condensed into ‘quark nuggets’, extremely dense colorsuperconducting blobs at the center of massive bodies like planets, stars, and asteroids. They can effectively be turned into antimatter at an efficiency of 10%.

    If these exist, they could be used for rapid interstellar travel without things like buzzard ramjets.

  2. Not sure where I read it, but someone was saying that whilst the numbers don't work for the ramjet, the magnetic funnel could still be useful in slowing a craft on its approach to another solar system. Does this study rule that our as well?

You might also likeRELATED
Recommended to you

HTML5 Test Browser Strategies Are Severely Outdated-long-established

The HTML5 test score is an indication of how well your browser supports the HTML5 standard and related specifications. Find out which parts of HTML5 are supported by your browser today and compare the results with other browsers. The HTML5 test does not try to test all of the new features offered by HTML5, nor…

Introducing 2 factor authentication to strengthen the security of your Knowasiak Account.

And why aren’t passwords good enough?Prior to tending to the inquiry 'what is two-factor verification' or 'what is 2FA,'...

Launching Version 13.0 of Wolfram Language and Mathematica

The March of Innovation Continues Just a few weeks ago it was 1/3 of a century since Mathematica 1.0 was released. Today I’m excited to announce the latest results of our long-running R&D pipeline: Version 13 of Wolfram Language and Mathematica. (Yes, the 1, 3 theme—complete with the fact that it’s the 13th of the…

DIY your scary little cute stand up skeleton out of paper (PDF.sheet available)

Download the whole pdf from here:I'll be very happy like this dancer one; if you are building this Cuttie...
- Advertisement -

Billionaire Chamath Palihapitiya: ‘nobody cares’ about China’s Uyghur genocide

WASHINGTON – Billionaire investor Chamath Palihapitiya triggered a backlash on social media after saying during a recent episode of his podcast that "nobody cares" about the ongoing human rights abuses against the Uyghurs in China.During a 90-minute episode, Palihapitiya told co-host Jason Calacanis on their "All-In" podcast that he would be lying if he said that…

Show HN: Declarative Instrumentation for Python

Pyccolo is a library for declarative instrumentation in Python; i.e., it lets you specify the what of the instrumentation you wish to perform, and takes care of the how for you. It aims to be ergonomic, composable, and portable, by providing an intuitive interface, making it easy to layer multiple levels of instrumentation, and allowing…

Must read

My Evaluate of SvelteKit for Tubby-Stack Net App Pattern

I just just currently tried out SvelteKit for the...
- Advertisement -