PostgreSQL query planner is full of surprises, so a common-sense approach to writing performant queries is sometimes misleading. In this blog post, I’ll describe examples of optimizing seemingly obvious queries with the help of EXPLAIN ANALYZE and Postgres metadata analysis.
All the test queries were performed on PostgreSQL 12 on a table seeded to one million objects. If you’d like to replicate similar behavior with a smaller development dataset, you’ll have to discourage the use of sequential scans by running:
This tutorial assumes some basic familiarity with reading the EXPLAIN ANALYZE reports. You can check out this blog post for an introduction to the topic.
1. Searching by a function call
It is common to search by values modified using a PostgreSQL function call. Let’s have a look at a query plan for searching a column by its lowercased value:
EXPLAIN ANALYZE output has been truncated for brevity.
The report indicates that the query planner performs an inefficient
Seq Scan and
Filter operations to execute a query. Thanks to adding
BUFFERS option to our query, we can see that the database had to fetch over 40k data pages using a slow disk read operations, and only ~1k of them were cached in memory.
A query searching by a function cannot use a standard index. So you’d need to add a custom index for it to be efficient. But, adding custom indexes on a per-query basis is not a very scalable approach. You might find yourself with multiple redundant indexes that significantly slow down the write operations.
If upper and lower case letters do not matter, you could run a migration to lowercase all values and make the standard indexes work. However, if you still want to store uppercase characters in your database, you can consider using the CITEXT extension. It creates a case-insensitive column that can be efficiently searched without creating custom indexes.
The 180ms execution time of the original query might not have seemed like much. But we’ve just managed to speed it up by orders of magnitude down to below 1ms! The new solution will remain performant regardless of the data size, and the query fetches only three buffer blocks from the in-memory cache. Also, by leveraging extension, we can avoid adding additional indexes.
2. Searching by a pattern
ILIKE queries are often used, but it’s not always obvious that the additional setup is necessary to execute them efficiently. Let’s see how a sample query behaves with a standard B-tree index:
Like before, query planner cannot leverage index and has to resort to inefficient
Seq Scan and
To get this query up to speed, we’ll have to add a custom extension and index type. Run the following commands:
Let’s rerun our query:
And now it’s executing below 1ms. Remember that
gin indexes are slower to update than the standard ones. So you should avoid adding them to a frequently updated table.
3. Ordering by
Unless a column is configured as
NOT NULL, you have to be careful when using it for sorting. A default
ASC order will always return
NULL values at the end of the results. But what if you want to sort potentially
NULL strings by descending order but keep all the
NULLs at the end? An initial approach might be to leverage
NULLS LAST custom sorting order. Let’s have a closer look at
EXPLAIN ANALYZE outputs that such queries would generate:
We can see an
Index Scan Backward entry, so our query correctly uses an index, and it was executed almost instantly. However, the results of this query will always start from
NULL values. So if we want to move them to the end of the response we could rewrite it like that:
But as you can see, the query now executes for over FIVE SECONDS. Although the
NULLS LAST option. Instead, the database has to sort the WHOLE table in memory or fall back to an even slower on-disk sorting. Not only does it kill the performance, but it could also significantly increase the overall memory usage.
You could fix it by adding a custom
NULLS LAST index as described in the PostgreSQL docs. But, just like in the case of searching by a function, adding custom indexes on a per-query basis is a bad practice.
A simple way to get the desired result is to write two queries instead. The first one would fetch the sorted non-null values. If the result does not satisfy the
LIMIT, another query fetches remaining rows with
As we’ve determined in the previous examples, adding a correct index can significantly improve a query execution time. However, overusing indexes can dramatically bloat the size of your database and increase maintenance memory usage. Additionally, indexes have to be updated on each write operation. So limiting their number and scope is usually a good approach.
Your database likely has a few so-called (by me) “NULL indexes”. These are the indexes that contain a high ratio of
Depending on business logic, a
NULL value might be used for searching, so these indexes are correct. But, usually, you wouldn’t write a query searching for rows containing a specific
NULL value. If that is the case, recreating the index to exclude
NULLs would reduce the disk usage and limit how often it has to be updated.
You can run the following commands to drop and rebuild an index to only include
NOT NULL rows:
It’s worth noting that this index can still be used by queries explicitly searching for all
NOT NULL values.
You can check out a PG Extras
null_indexes method (or execute its raw SQL source code) to see if your database has many indexes that could be trimmed down and what are the expected disk space savings:
Output of PG Extras
You can read more about optimizing PostgreSQL performance with PG Extras in this blog post.
5. Update transaction scope
A usually recommended practice is to keep the number of database commits to a minimum. It means that wrapping multiple update queries into a single transaction should improve the write performance.
For many common scenarios, this is an optimal strategy. But, using a single transaction for a massive data update could cause a problem with so-called locks. So let’s see what’s the impact of updating over 100k rows in a single transaction:
While the transaction is still pending, you can investigate what locks it generated by using the PG Extras
locks method (or executing its raw SQL source code).
You might not have a large enough dataset to manually execute the
locks SQL while the update transaction is still running. In that case, you can fake slow execution time inside a single transaction like that:
A simple way to delay SQL execution for 15 seconds
Now, running the
locks SQL should return similar output:
Output truncated for brevity
You can see that the update operation acquires a
RowExclusiveLock on the table rows and locks corresponding indexes. It means that any other process that tries to update the same rows during the long single-transaction update process has to wait for it to complete. As a result, a large-scale update performed by a background worker process could potentially timeout web server processes and cause a user-facing app outage.
To avoid this issue, you could add batching to the update operation, using the similar SQL:
The above example updates rows in batches of 10k at a time. The whole operation will likely take longer than doing it inside a single transaction. But, each update step will be quick to commit database changes, so other processes would not get stuck.
If you suspect that your app’s performance is degraded by locking transactions, you can use a combination of
blocking PG Extras methods to monitor for long-lasting table locks.
The challenge of optimizing PostgreSQL is that most issues start emerging only with a large enough dataset and traffic. While creating a new feature with a small development database, you’re not likely to discover potential bottlenecks. That’s why it’s essential to monitor the production performance and regularly dive into the EXPLAIN ANALYZE output to keep things running at an optimal speed.
NOW WITH OVER +8500 USERS. people can Join Knowasiak for free. Sign up on Knowasiak.com